Installing Procedur

 

Characteristic

afety:

It will not burst because of belb or hydrosphere.When the accident happens,the rheoscope in the ballast will make the power off so as to keep us safe.And we adopt high insulated wire and design without electromagnetism,make you working without any anxiety.

Long life:

The life-span is as long as 3000 hours,much more than the total hours that the automobile work at night. 

Save electricity:

Only need the electricity of 35W,lightens the power load system greatly,it saves 40% on the electricity,improve vehicle performance correspondingly,save the energy. 

Exceed the luminance:

The xenon bulb provides as theree times light as halogen bulb.Therefore,the driver can see more higher,wider,farther.So it is safer to drive a vehicle.

Good colour temperature:

The CT is 4300K---12000K,is close to the sunlight and comfortable to our eyes,also benefit for the safe driving indirectly.

Easy to install:

Only need to insert the xenon lamp into the hole of the original light,fixed the ballast,connect and have the cable;And does not need to change the original part of vehicle.

HID ballast standard

Work voltage

It can work in a wide range of voltage.Such as in the voltage between 8V and 18V direct current,ballast can work.

Protect function

Overloaded protect: In order to prevent burning the bulb and letting the car owner find the vehicle trouble in time when the voltage is too high,when the power direct current presses and exceeds 18V, the stable device quits work automatically,make output power not exceed 45W,protect the stable device,prevent HID bulb from being damaged.

Low voltage protect:In order to prevent the bulb from using up the automobile battery and then the automobile being unable to start normally.When the direct current is under 8V,the ballast will be out of work automatically so as to avoid damaging.

Unload protected:When the ballast has not been connected with the bulb,in unloaded state,the ballast will be out of work automatically so as to prevent the high-tension electricity from injuring staff members.

Short circuit protect:Short circuit protect when the ballast meets the unexpected situation,in the state of shorting out,the stable device quits work automatically,avoid damaging.

The transposition protecting:When the stable device is in installation,operate people fault is it import power straight negative pole to when connecting inside out to make,the stable device quits work automatically,guarantee the stable device is not damaged.

Start the performance power

Power input when the standard voltage 12.8V fast,the electric current is not smaller than surveying and inviting 8.5A,make the xenon lamps connected in starting one second,he luminous flux reaches 20% of the standard luminance,in 4 seconds,he luminous flux reaches 80% of the standard luminance.